AUTONET TV

Stopping "Brake" Downs (Brake Pad Replacement)

If someone tells you to put the brakes on something, you know it means stop.  And stopping is one of the most important safety maneuvers you can do in any vehicle.  That means your brakes have to work properly. 

Let's face it.  You stop dozens of times every time you drive.  And over time, that takes its toll on your brakes.  Friction is what stops your vehicle.  Most newer vehicles have disc brakes, and the parts that wear out the fastest are those that rub against each other every time you stop, the rotors and the pads.

The rotors are discs that rotate with the wheels, and the pads are removable surfaces that make contact with the rotors to slow or stop your vehicle.  Bits of both wear off each time you stop, and when enough of either (or both) lose too much material, your brakes become unable to safely slow or stop your vehicle. 

The pads usually are the parts that wear out first.  Signs that your brakes might be getting worn are:

• You hear grinding, squeaking, or clicking when you apply them
• It takes a longer distance to stop
• Your pedal vibrates when you brake
• The front of your vehicle pulls to one side when you brake

If you notice any of these, bring your car to us so we can have a technician inspect your brakes. Most brake pads have a wear indicator that indicates it's time they should be replaced.  The technician who is checking things out will also look at your rotors for wear, as well as other brake system components.

With regular inspections and maintenance, you'll be sure that when you need to stop, your vehicle will be up to the task.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Stopping "Brake" Downs (Brake Pad Replacement)

If someone tells you to put the brakes on something, you know it means stop.  And stopping is one of the most important safety maneuvers you can do in any vehicle.  That means your brakes have to work properly. 

Let's face it.  You stop dozens of times every time you drive.  And over time, that takes its toll on your brakes.  Friction is what stops your vehicle.  Most newer vehicles have disc brakes, and the parts that wear out the fastest are those that rub against each other every time you stop, the rotors and the pads.

The rotors are discs that rotate with the wheels, and the pads are removable surfaces that make contact with the rotors to slow or stop your vehicle.  Bits of both wear off each time you stop, and when enough of either (or both) lose too much material, your brakes become unable to safely slow or stop your vehicle. 

The pads usually are the parts that wear out first.  Signs that your brakes might be getting worn are:

• You hear grinding, squeaking, or clicking when you apply them
• It takes a longer distance to stop
• Your pedal vibrates when you brake
• The front of your vehicle pulls to one side when you brake

If you notice any of these, bring your car to us so we can have a technician inspect your brakes. Most brake pads have a wear indicator that indicates it's time they should be replaced.  The technician who is checking things out will also look at your rotors for wear, as well as other brake system components.

With regular inspections and maintenance, you'll be sure that when you need to stop, your vehicle will be up to the task.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Always on Guard (TMPS)

One of the most important things you can do to keep your vehicle running safely is to make sure your tires are properly inflated.  If one or more is vastly over- or underinflated, that has the potential to cause major handling problems and may result in a dangerous accident.

All vehicles in recent years are equipped with Tire Pressure Monitoring Systems, or TPMS.  One system uses small sensors in the tires that continually check the pressure in each tire.  That sensor sends a signal to computers in your vehicle which turns on an instrument panel light warning of low pressure when at least one is very low. Or it may update a numeric reading on your instrument panel which gives you an approximation of how many PSI (pounds per square inch) of air is in each tire. 

Another system works with your antilock brake system to measure the size of your vehicle’s tires.  When one wheel is going faster than another, it will spin faster. A computer sees that and alerts you that tire’s diameter is smaller than the others and therefore must be underinflated.

No matter what system you have, it’s also helpful for you to know how much pressure each tire is supposed to be inflated to.  You can find that on a label on the driver’s side door sill. In addition, the TPMS system should not be used as a substitute for checking your tires with a tire gauge since the TPMS accuracy usually isn’t quite as precise.  Keep in mind that tire sensors can fail, so each system acts as a backup for the other. 

Since many vehicles these days don’t have spare tires, it’s good to know that your TPMS can warn you if you have a leak in one of your tires.  If you get a low-pressure warning, many systems will tell you which tire is low, so you can do your own visual check.  Often you can see if you’ve picked up a nail or a screw if it’s sticking out of the tread or near the sidewall.

Being able to receive an early warning from your vehicle of abnormal tire pressure may give you a chance to safely drive to a service center before your tire slowly goes completely flat (which can ruin the tire and badly damage the rim). It also may ultimately prevent you from being stranded somewhere with a flat tire or, most importantly, having a sudden blowout on the road. 

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Bad Vibrations (Brake Rotor Replacement)

If you’ve ever stepped on your brake pedal and felt your vehicle vibrate, that’s a signal that you shouldn’t ignore.  A pulsating brake pedal is a sign that something is wrong.  Braking action should be smooth, sure, and quiet, not shaky and noisy.

Most newer vehicles have disc brakes, called that because they have a round, flat disc connected to each wheel.  Those discs are the rotors. Other parts called brake pads are squeezed against those discs when you press on the brake pedal.

Remember that vibration we mentioned? That can be caused by the rotor not having a straight, true surface. Rotors can heat up from friction and warp.  They can become thinner from constant wear.  Rotors can rust from the elements they’re exposed to, such as rain, snow ice, and salt.  They can get grooves in them from so many contacts with the pads. 

The signs of worn rotors are vibrations, grooves on the rotor (which you can see sometimes through open spots in the wheel) noise such as squealing or scraping when you brake, and increased stopping distance.   

While it used to be common for rotors to be machined (shaved down to restore their flat surface), newer vehicles have thinner rotors, so your service adviser may suggest you replace rotors when they start showing signs of significant wear.

Brakes are important safety equipment for every vehicle.  They enhance your control while driving, so it’s important that they be regularly inspected and maintained.  A good time is when you have your tires rotated. A technician can then look at all components of your brakes and recommend any service you may need to keep your brakes in top shape.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Keeping Your Cool (Coolant System)

No matter what the weather is like outside, your internal combustion engine expects to keep its cool all the time, even when it's really cold.  That's because engines create the power that moves you to your destination by a series of tiny explosions of a fuel and air mixture. In turn, that generates a lot of heat in a small space.

Your vehicle has a complete cooling system with a lot of different parts that work together to keep the temperature at a point where the metal engine parts won't heat up enough to warp.  Its lifeblood is coolant, a liquid that circulates through the engine (and, in most vehicles, the transmission, too) through a series of hoses and tubes. 

In order to get rid of the coolant's heat, your vehicle has a part you probably recognize: the radiator.  It does what its name proclaims: radiates heat.  The radiator has a series of thin metal fins that coolant goes through, and when outside air passes over them, the heat is dissipated from the radiator into the air.

The water pump (which is technically a coolant pump) is what propels the coolant where it needs to go. 

When there's a problem in the coolant system, it may because it's leaking somewhere.  A few things to look out for are the temperature gauge heading into the hot, or red, zone, fluid leaks under your vehicle, or the sweet smell of coolant under your vehicle after it's been parked.

If your vehicle has any of those signs, bring it in so we can check things out.  A technician will inspect the water pump and hoses for any signs of leaks.  They'll also look for leaks or holes in the radiator core or cores. 

One other potential trouble spot is the radiator cap that can sometimes fail to keep the required pressure in the radiator.  Once the problems are fixed, they'll add the correct coolant and you'll be on your way.  We want you to always keep your cool. 

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net