AUTONET TV

A Real "Pane" (Window Maintenance and Repair)

It's pretty frustrating when your driver's window won't work.  You can't get your food at the drive-thru without opening the door, have a tough time using the ATM from your vehicle, can't have that fresh breeze blowing through your hair as you listen to your favorite road tunes.

Plus, there's a safety factor.  Your windows provide an escape route in case you need to get out and the doors won't work.  Let's take a look at what's going on when your window won't operate.

Most vehicles these days have power windows.  They have an electric motor in each power window and sometimes those fail.  They often give you a warning that they're on their last legs by making a noise or hesitating, so if you get a sign like that, have a technician check it out. Loss of power can also be due to a blown fuse, a bad switch or faulty wiring.

All windows have something called a regulator that moves the glass up and down.  They have a lot of moving parts in them which can break, become bent, rust or get out of alignment. The glass moves along a window track guide.  Sometimes if the glass gets out of the track, it won't move up and down the way it's designed to do.

When you take your vehicle over to a repair facility, a technician can pinpoint the cause of your malfunctioning window.  Often it involves having to remove the door panel to gain access to the components inside.  But when everything's working right, you'll be able to throw that annoying inconvenience right out the window.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Taking the Heat (Heater Hose Maintenance/Repair)

If you have an internal combustion vehicle, you know it has a lot of hoses that carry various fluids.  And if you have a heater in your vehicle, you'll have heater hoses.

A heater hose connects to and from the engine so some coolant can be circulated through a little radiator called a heater core.  In cold weather, that heater core acts as a heat exchanger to heat up your cabin.

Even in the hot weather, the heater hoses can prove problematic.  That's because they may remain pressurized even though you're not running your heater.  Heater hoses are made out of tough materials since they must handle heat and pressure.  But even the durable rubber, plastic and metal they are made out of can crack or leak from years of use.  That means coolant can be sprayed out into the engine compartment or leak onto a driveway or garage floor. 

You may be able to see a puddle of coolant under your vehicle or perhaps smell the odor of the coolant under the hood.  Some say it has a sweet smell.  Another sign coolant may be leaking out of the heater hoses is your engine may be running hotter.   You'll be able to tell by watching the heat gauge on your dash.  Let's say your heat gauge usually points just slightly below halfway between the C and H (Cold and Hot) of the heat gauge.  But now it is just slightly above.  That's enough to tell you that the coolant temperature has gone up a little, a possible sign of trouble.

This is a good time to swing by your service facility and have them take a look. If they catch the leak when it's small, it's a relatively simple matter of draining the coolant, replacing the hoses and replacing the coolant.  Sometimes, though, a heater hose can suddenly burst and a lot of coolant can leak out quickly.  That can, in turn, cause your engine to start to overheat.  In that case, you may see your vehicle's temperature gauge shoot up pretty quickly.  Then it's best to pull over and have your car towed to a repair facility since driving with no coolant can cause severe engine damage.

Preventative maintenance is your best insurance against heater hose problems.  A technician will periodically check for any signs of cracks or leaks.  You should expect to replace a heater hose at least once during the time you own your vehicle.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Busted! Air Conditioning (Air Conditioning Maintenance)

Your vehicle's air conditioning is something you count on when the weather heats up.  But there's bound to be a day when you turn it on and one of these things happens:

• Only warm air blows out
• Cold air starts blowing out but then it turns warm on its own
• It's not blowing air at all
• It blows smelly air out

Some people are tempted to try to make the diagnosis—and the repair—on their own.  They think it's just run out of refrigerant and they can pick up a can at a local auto parts store and re-charge it.   If only it was that easy.

A vehicle's air conditioning system is complex and made up of many parts.  A compressor, evaporator, condenser, tubing, hoses, sensors, valves… the list goes on and on.

Each of these components could be the reason for the problem.  It could be a leak that's letting the refrigerant escape, but simply re-charging the system hasn't fixed the problem. You have to find the source of the leak and fix it. Service facilities have a device called a "sniffer" which can sniff out refrigerant chemicals. And they can use black light to locate refrigerant that has an ultraviolet dye in it. 

But often other components wear out; blower motors go bad, resistors blow, tubes clog, compressors fail. And diagnosing that takes training and special equipment you'll find at your service facility.

One other thing to keep in mind.  It's always better to catch any problems in the air conditioning system before it fails. Ask your service advisor about having

the A/C checked as part of the vehicle's maintenance.  That's the cool way to go. 

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

The Key Won't Turn! (Ignition Problems)

You've just arrived at the store shopping and you're ready to head home.  You put your key in the ignition and… oh, no! The ignition won't turn! What do you do now?

Don't panic.  There are some things you can do to get going again.  The first thing to do is see if you have a locking steering wheel, an anti-theft feature that was introduced around 1970.  Sometimes it sticks.  Move the steering wheel side to side while you try to turn the key and you might be able to get it to release. 

Another thing to check is to see if your vehicle is in gear.  Most vehicles will only allow you to start the ignition if it's in park or neutral.  If you have an automatic transmission vehicle and it is in park, try jiggling the shift lever and try the key again.  Sometimes the safety mechanism doesn't properly make contact or gets a little sloppy. 

If both of these don't work, it could be your vehicle's battery is dead.  Some newer electronic systems require power so the key can turn. Others have alarm systems that detect if doors are open. 

Other issues that can cause key problems include something jammed in the lock cylinder.  Or some of the springs or pins inside may be stuck.  Consider that it may be the key itself.  Sometimes they get bent or simply wear out from the number of times they've been put in and taken out of the cylinder.

No matter what the cause, the first time this happens you should have your repair service facility check it out. That’s because if it happens once, it can happen again.  Even if you were able to get going again on your own, your ignition/key has warned you that something's wrong.  Have it checked out by a pro so you’re not locked into a bad situation.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net

Power Failure (Broken Power Seat)

Know anyone who doesn't love a power seat in an SUV, a car, truck or van? They're convenient and precise in their adjustments.  But when they break, oh, what a pain.  Not only is it inconvenient, it may leave your seat position too close to the steering wheel or too far from the pedals.  This is a must-fix problem.

There are many things that cause a power seat to fail:

• Seat controls.  These are either at the side of the seat or in the door.  Both are places that can be exposed to moisture or other contaminants.  When the controls stop working, they usually need to be replaced.
• Seat motor.  Electric motors are what make a power seat move, and sometimes they fail.  Sometimes they just get worked to death and die of old age.  Replacement is the most common remedy.
• Fuses. A power seat is, after all, powered by electricity and all vehicle power systems have fuses to protect them.  A technician can determine which fuse may have blown and replace it.  But it's also important to figure out what caused the fuse to blow and deal with that, too.
• Wires.  There are wires under the seats that move when you move the seat.  Sometimes they get stretched, kinked or ripped.  In a power seat malfunction, it may be a wiring harness that needs to be replaced.
• Gears.  They help the seat move and may need to be realigned or replaced.
• Obstructions.  Yes, a piece of trash or a kid's toy has been known to jam up the works of a power seat. Taking them out of the mechanism may get your seat working again.

Most people pay extra to have power seats in a vehicle. So make sure you keep that convenient feature working. And don't forget that it's a safety issue, too.

Arizona Auto and Radiator Repair
1255 E FRY BLVD
Sierra Vista, AZ 85635
520-459-2216
http://www.azautorepair.net